User Tools

Site Tools


products:jtagserial_programmer

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
products:jtagserial_programmer [2020/06/30 20:23]
po [Error: contents differ]
products:jtagserial_programmer [2020/06/30 20:24] (current)
po [Error: contents differ]
Line 210: Line 210:
 </code> </code>
  
-4-byte addresses is not implemented in latest openocd jtagspi driver (20190116), use the following temporary workaround patch to revert to 3-byte addresses commands:+"contents differ" error: 4-byte addresses is not implemented in latest openocd jtagspi driver (20190116), use the following temporary workaround patch to revert to 3-byte addresses commands:
  
 {{ :tools:flashid.patch |}} {{ :tools:flashid.patch |}}
Line 220: Line 220:
 </code> </code>
  
-**Important note:** After applying the patch, these warnings are fine as long as you dont get "content differ" errors !+**Important note:** After applying the patch, these warnings are fine as long as you dont get "contents differ" errors !
 <code> <code>
 Warn : device needs paging or 4-byte addresses - not implemented Warn : device needs paging or 4-byte addresses - not implemented
 </code> </code>
products/jtagserial_programmer.txt ยท Last modified: 2020/06/30 20:24 by po