User Tools

Site Tools


products:screamer_m2

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Last revision Both sides next revision
products:screamer_m2 [2020/06/30 20:08]
po [Program the SPI Flash]
products:screamer_m2 [2020/06/30 20:10]
po [Program the SPI Flash]
Line 77: Line 77:
 In short: In short:
  
-1. Power the Screamer from the PCIe M.2 connector ! (JTAG cable alone does not provide all the voltage required)+1. **Power the Screamer** from the PCIe M.2 connector ! (JTAG cable alone does not provide all the voltage required)
  
 2. Connect the JTAG cable to the corresponding pins on the Screamer board. 2. Connect the JTAG cable to the corresponding pins on the Screamer board.
products/screamer_m2.txt ยท Last modified: 2020/07/07 20:11 by po